EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024>  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024>  2025 
<== Date ==> <== Thread ==>
Subject: Re: Build PCAS within the EPICS base
From: Ralph Lange via Tech-talk <tech-talk at aps.anl.gov>
To: EPICS Tech Talk <tech-talk at aps.anl.gov>
Date: Tue, 3 Sep 2024 08:55:46 +0200
On Tue, 3 Sept 2024 at 04:49, LONG FENG via Tech-talk <tech-talk at aps.anl.gov> wrote:
Hi all, when I tried to build the PCAS module within the EPICS base, I encountered the following errors:
[...]
Versions:  Ubuntu 22.04.4 LTS, pcas-4.13.2

what do I need to do?

Update to PCAS 4.13.3. This problem has been fixed 3 years ago.

Cheers,
~Ralph

References:
Build PCAS within the EPICS base LONG FENG via Tech-talk
Navigate by Date:
Prev: Build PCAS within the EPICS base LONG FENG via Tech-talk
Next: Sequencer RULES_SNCSEQ: No such file or directory Florian Feldbauer via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024>  2025 
Navigate by Thread:
Prev: Build PCAS within the EPICS base LONG FENG via Tech-talk
Next: Sequencer RULES_SNCSEQ: No such file or directory Florian Feldbauer via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024>  2025