| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Sequencer RULES_SNCSEQ: No such file or directory |
| From: | Florian Feldbauer via Tech-talk <tech-talk at aps.anl.gov> |
| To: | tech-talk at aps.anl.gov |
| Date: | Tue, 3 Sep 2024 12:03:21 +0200 |
Ok. I just tried to install the example IOC within a clean Debian based docker container and it works....
Seems there is something off with my local EPICS installation
Works fine for me.
In a newly created support module area for 7.0.8.1...Freshly downloaded and compiled Base 7.0.8.1.Freshly downloaded and compiled sequencer-2.2.9
The RELEASE.local file one up of the two has:SNCSEQ = /home/ralph/work/EPICS/7.0.8.1/sequencer-2.2.9
EPICS_BASE = /home/ralph/work/EPICS/7.0.8.1/base
Create a new directory ttt, set the RELEASE.local one up as a soft link to the RELEASE.local in the new support module area.
$ /home/ralph/work/EPICS/7.0.8.1/base/bin/linux-x86_64/makeBaseApp.pl -t example test
$ make
No issues.
The TOP/cfg directory is the install directory for Makefile snippets. The sequencer installing its snippet in that place is intended and expected.
Cheers,
~Ralph
-- Ruhr-Universität Bochum AG der Experimentalphysik I Dr. Florian Feldbauer NB 2/131 / Fach 125 Universitätsstr. 150 D-44801 Bochum Office: NB 2/134 Phone: (+49)234 / 32-23563 Fax: (+49)234 / 32-14170 https://paluma.ruhr-uni-bochum.de