LEDA Vacuum System Approach

Use Capfast to create the hierarchical description of the database - subsystem, device, component, signals

Use Capfast to configure the process flow and data flow - making all SCAN, FLNK, soft INP/OUT, NPP/PP, CALC, and HIGH for BO visible on the schematic.

From the Capfast produced database - create an Access database

In Access - enter configuration fields: hw INP/OUT, LINR, DTYP, EGUF, EUGL, ZNAM, ONAM etc….

Load the database from Capfast then the database from Access - EPICS will create records if there is no existing record - or overwrite any fields in the last loaded database

Previous slide Next slide Back to first slide View graphic version

| LANL | Lansce | UC | DOE |

L O S A L A M O S N A T I O N A L L A B O R A T O R Y
Operated by the University of California for the US Department of Energy

LEDA Vacuum System Approach

Use Capfast to create the hierarchical description of the database - subsystem, device, component, signals

Use Capfast to configure the process flow and data flow - making all SCAN, FLNK, soft INP/OUT, NPP/PP, CALC, and HIGH for BO visible on the schematic.

From the Capfast produced database - create an Access database

In Access - enter configuration fields: hw INP/OUT, LINR, DTYP, EGUF, EUGL, ZNAM, ONAM etc….

Load the database from Capfast then the database from Access - EPICS will create records if there is no existing record - or overwrite any fields in the last loaded database

For problems or questions regarding this web site contact George Vaughn.