| <1994> 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | <1994> 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | IOC address spec |
| From: | [email protected] (Edmond Desmond) |
| Date: | Wed, 10 Aug 1994 09:27:03 -0400 |
Is there an IOC address specification document which describes required VME address space assignments for VME modules? The last document I have is the one authored by Len Burczyk from August 1989. Also are VME modules still required to be located at fixed addresses for module type? I recall from earlier work that this resulted in short address space address allocation problems. If so then I would suggest this might be addressed at the EPICS collaboration meeting. Ed Desmond (516) 282-4768 ribm00.rhic.bnl.gov