EPICS Home

Experimental Physics and Industrial Control System


 
1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: error in compiling xmca
From: "Zhao Dong" <[email protected]>
To: [email protected]
Date: Mon, 31 Jul 1995 15:46:10 -0500
Hi, all:

When I compiled the extension xmca, I got the error message as following:

cfe: Error: ../getlist.c, line 435: The number of arguments doesn't agree with
the number in the declaration.
     XtAddCallback(fileSelectionBox0, ((char*)&_XmStrings[8526]) ,
 -----------------^
gnumake[2]: *** [getlist.o] Error 1

Could anybody tell me what is wrong?  In the source file getlist.c , line 435,
only three arguments are present,  XtAddCallback needs four arguments.

I am using "cc -xansi" on a SGI Indy.

dong


-- 
--------------------------------------------
Dong Zhao 
[email protected]
[email protected]
Tel: 312-666-7681 (h)
     708-467-3083 (o)
-------------------------------------------


Navigate by Date:
Prev: Re: Experiences with VxWorks 5.2? Andy Kozubal
Next: Hardware Supported by EPICS Klaus Woerle
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Experiences with VxWorks 5.2? Andy Kozubal
Next: Re: error in compiling xmca Ben-chin K. Cha
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024