EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: EPICS support for Precision Micro Control products?
From: [email protected] (Paul Stomski)
To: [email protected]
Cc: [email protected], [email protected], [email protected]
Date: Mon, 12 Feb 96 17:24:01 HST
	Here at W. M. Keck Observatory, we are currently considering
	the use of a motion control solution from Precision Micro
	Control (PMC).  Specifically the DCX-VM200 and MC-200
	products.

	It is absent from the most recent list of supported hardware
	compiled by Karen Coulter.

	Does anyone know if EPICS support for these devices exists? 


	Paul Stomski
	AO Software Engineer
	W. M. Keck Observatory 


Navigate by Date:
Prev: Re: macro substitution William Lupton
Next: RE: EPICS archive to DADiSP format? Matthias Clausen DESY -MKV2/KRYK-
Index: 1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Displaying edd/dm screens on a dumb terminal Michael A. Oothoudt
Next: PACT -> SDIS Ian Smith
Index: 1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024