| 1994 1995 <1996> 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 <1996> 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: IRM and EPICS |
| From: | Matthias Clausen DESY -MKV2/KRYK- <[email protected]> |
| To: | [email protected] |
| Cc: | [email protected] |
| Date: | Fri, 17 May 1996 9:35:18 +0200 (MET-DST) |
Bill Brown writes: >Is anyone using an IRM (Internet Rack Monitor) to run EPICS (as opposed >to HiDEOS)? We are running EPICS on the IRM and fully support nearly all I/O modules. Only the swift Ai- board is currently not supported. What do you mean by (as opposedto HiDEOS) I do not see a HiDEOS OR IRM. The IRM I/O should be used as any other direct I/O hardware using EPICS driver and device support. HiDEOS to my understanding does deal with asynch I/O (as well as our CDI - common driver interface - does). Driver support is not part of the current EPICS distribution but can of course be copied from us. The description can be obtained from: http://herao1.desy.de/cc/www/doc/irm.html Regards Matthias Matthias Clausen Deutsches Elektronen Synchrotron DESY Gruppe: MKS2/KRYK Notkestrasse 85 VXHERA::CLAUS D-22607 Hamburg Bahrenfeld [email protected] Tel: -49 40 8998-3256 [email protected] Fax: -49 40 8998-4388 PSI%(0262)45050958002::CLAUS