Experimental Physics and Industrial Control System
Hi everybody,
We need to control insrtument using RS-485 communications. We use a
GreenSpring IP carrier (VIPC610) with an IP module (TIP865 from Tews
DatenTechnik). The driver is a VxWorks device driver for TIP865 serial
IP.
But we have a problem of interrupt. When the instrument send info to the
VME, the CPU is blocked before we could read the info (the interrupt
vector for reading doesn't pass). The system seems to keep an old
interrupt on the bus, that prevents following routines to start.
Is there someone who met such kind of problem.
Thanks for your advices.
Regards,
Fred
--
_________________________________________________
Frederic MICHAUD
CERN : CH-1211 Geneve 23 - Switzerland
Division: ECP-CO
Phone : Office (+41) 22 767 33 59
: Home (+33) 04 50 40 71 19
FAX : Office (+41) 22 767 74 10
E-mail : [email protected]
_________________________________________________
- Replies:
- Re: RS-485 communication Andrew Johnson
- Navigate by Date:
- Prev:
Re: beginner question on Xy566 mauro
- Next:
Re: RS-485 communication Andrew Johnson
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: beginner question on Xy566 mauro
- Next:
Re: RS-485 communication Andrew Johnson
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024