EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: developing Gpib devSupport
From: mauro <[email protected]>
To: [email protected]
Date: Fri, 09 Jan 1998 14:56:45 +0000
I'm using a 3.13.beta11, MV162, GPIB-1014, Keitley 199
and Sun workstation.
I've written my first Gpib device support, it's running well.
Now, with this I can read the DCV but I want add other
Keitley 199 Gpib functions. This is the problem :
when I modify the my devXxK199Gpib.c ( under R3.13.0.b11/
base/src/devOpt), which are the istruction to compile the new
devXxK199Gpib.c and make it in use for my xxxApp ?
 
Probably the solution is use gnumake/gnumake rebuild
commands, but where ?

Thank you.
Mauro.

Navigate by Date:
Prev: Re: EPICS r3.13 fields RTYP/VERS Ralph Lange
Next: SNC bug and question Frank Lenkszus
Index: 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: proposed RTYP field Marty Kraimer
Next: SNC bug and question Frank Lenkszus
Index: 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024