1994 1995 1996 1997 <1998> 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 <1998> 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Problem booting ioc w/ rsh instead of ftp |
From: | "Hammonds, John" <[email protected]> |
To: | "'[email protected]'" <[email protected]> |
Date: | Thu, 7 May 1998 15:39:22 -0500 |
I am trying to get an IOC to bootup using w/ rsh instead of ftp. When I make the switch I get the following messages (followed by the vxWorks Logo) and some other messages. Can anyone determine from this why the IOC loads using ftp and not rsh? Attaching network interface ei0... done. Attaching network interface lo0... done. Loading... 437992 + 50684 + 27258 Starting at 0x1000... Attaching network interface ei0... done. Attaching network interface lo0... done. Loading symbol table from apis:epicsApps/bin/mv167/vxWorks.sym ...apis:stty: : I nvalid argument Error opening apis:epicsApps/bin/mv167/vxWorks.sym: status = 0x290010 Thanks, John ------------------------------------------------------------------------ ---- John P. Hammonds Intense Pulsed Neutron Source Argonne National Laboratory (630)252-5317