EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: IP Drivers
From: Bill Brown <[email protected]>
To: Bob Dalesio <[email protected]>, tech talk <[email protected]>
Date: Tue, 09 Feb 1999 11:41:30 -0800 
Bob Dalesio wrote:
> 
> Hi Bill,
>         Here are the sources to the IP drivers that are currently in my
> care. We did not carry forward the Greensprings ADC - but went to the
> systran adc instead. We also did not use the greensprings relay digital
> input - but the Greensprings binary IO module. We have programmed in that
> low order 12 bits are outputs and the high order are inputs (or vice versa)
>         Hope this helps,
>         Bob
> ps. Reply to [email protected]
> 
>   

OK, Bob - many thanks!

BTW - WRS still can't seem to get the bsp for the mcp750 (PPC on cPCI)
to work.

I fear that we're on the bleeding edge, being hoist with our own
petard.

TTYL!!

-bill
Navigate by Date:
Prev: epics ip code Bill Brown
Next: EPICS 3.13.1 and CVS schoeneburg
Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: epics ip code Bill Brown
Next: EPICS 3.13.1 and CVS schoeneburg
Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024