EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: Acquiring data from a CCD
From: Philip Taylor <pbt@observatorysciences.co.uk>
Date: Tue, 04 May 1999 12:34:29 +0000
I am looking at a commercial CCD imaging system 
that outputs its data on a parallel printer port
(or via a PC expansion card).
. 
What would be a good EPICS solution for doing the
data acquisition with this camera?

Philip Taylor

===============================================================================

Philip Taylor                      email : pbt@observatorysciences.co.uk
Observatory Sciences Ltd.          Phone : (UK)+(0)1223-508257
Unit 21, William James House
Cowley Road,
CAMBRIDGE   CB4 0WX.
U.K.

===============================================================================


Navigate by Date:
Prev: MPF - Message Passing facility Marty Kraimer
Next: Why is the port number changing during boot of an IOC? Werner Portmann
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: MPF - Message Passing facility Marty Kraimer
Next: Why is the port number changing during boot of an IOC? Werner Portmann
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019