EPICS ADC boards

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	ADC boards
From:	Liam O Neill <[email protected]>
To:	tech-talk <[email protected]>
Date:	Mon, 16 Aug 1999 13:00:10 -0400 (EDT)

Hi
I was wondering if anyone knew of a "good" voltage integrating ADC I could
use. It should run on a VME crate, with at least 8 channels, at at least
600Hz and be triggerable, either via software or some extranal input. I'd
imagine there would be lots around, but getting an EPICS driver for them
is the problem.
Thanks
Liam

Navigate by Date:: Prev: Re: dynamic INP/OUT evaluation Luedeke Andreas; Next: Sequencer on Host system (or something similar) Mathias . Muench; Index: 1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: dynamic INP/OUT evaluation Luedeke Andreas; Next: Sequencer on Host system (or something similar) Mathias . Muench; Index: 1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024