I have a problem building a simple application under 3.13.1.1 that builds
ok under 3.13.1. It involves a driver for a VMIC 4116 ao board. The
command gmake is using to compile drvVmi4116.c is
/usr/local/epics/vx/vxV52p1/vw/../vxgccV2.2.3.1/solaris.68k/bin/cc68k
-B/usr/local/epics/vx/vxV52p1/vw/../vxgccV2.2.3.1/solaris.68k/lib/gcc-lib/
-nostdinc -ansi -pedantic -O2 -fstrength-reduce -Wall -DCPU=MC68040
-m68040 -DCPU_FAMILY=MC680X0 -DvxWorks -DV5_vxWorks -fno-builtin -I.
-I.. -I../../../include
-I/home/epics3/Appl/synApps/share/include -I../../../include
-I../../../include/os/vxWorks -I/usr/local/epics/3.13/base/include
-I/usr/local/epics/3.13/base/include/os/vxWorks
-I/usr/local/epics/vx/vxV52p1/vw/h -c ../drvVmi4116.c
I get several apparently "normal" warnings, culminating in
../drvVmi4116.c: At top level:
../drvVmi4116.c:49: warning: `sccsID' defined but not used
gmake[3]: *** [drvVmi4116.o] Error 1
gmake[3]: Leaving directory
`/home/epics3/Appl/synApps_R3.13.1.1/pnc/idApp/src/O.mv162'
I also noticed that for some reason vxWorks and vxWorks.sym were not
installed in the build of 3.13.1.1, so I'm not 100% sure the base build
was ok, but it did complete. This is happening under solaris 2.5.1, vx 5.2p1.
I'd appreciate any help.
Dale Brewe
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dale L. Brewe PNC-CAT/U. of Washington
ph: 630 252 0582 fax: 630 252 0580
Mail:
Argonne National Laboratory/APS
Bldg 435E sector 20
9700 S. Cass Ave.
Argonne, IL 60439
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
