EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: EPICS drivers for PLCs?
From: Marty Kraimer <[email protected]>
To: Carl Lionberger <[email protected]>, [email protected]
Date: Tue, 23 Nov 1999 15:03:22 -0600
Carl Lionberger wrote:
> 
> We've developed a record that uses the block transfer calls in drvAb.c to
> communicate with a PLC-5 over remote I/O from a 6008 scanner.  It's similar to
> the abDcmRecord but talks to a PLC-5 port configured as a remote I/O adapter
> rather than to a DCM card.


Note that the recent versions of abDcmRecord suport this. Note in the on-line
doc

DCMT 
    DCM type. This specifies if the DCM is a real DCM or a PLC adapter port. 


Marty


References:
EPICS drivers for PLCs? Tony Wilson
Re: EPICS drivers for PLCs? Carl Lionberger

Navigate by Date:
Prev: Re: EPICS drivers for PLCs? Carl Lionberger
Next: XY566 Nick Rees
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: EPICS drivers for PLCs? Carl Lionberger
Next: Re: EPICS drivers for PLCs? Bill Brown
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024