| 1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: GreenSpring IP488 Industry Pack Support and New Focus 8732 Controller |
| From: | Marty Kraimer <[email protected]> |
| To: | "Leonard J. Reder" <[email protected]> |
| Cc: | [email protected], [email protected], Andrew Booth <[email protected]> |
| Date: | Wed, 15 Dec 1999 14:12:43 -0600 |
Look at http://www.aps.anl.gov/asd/people/mrk/epics/modules/bus/gpib/mpfGpib/index.html Please note the UNDER CONSTRUCTION warning. Everything is in place but not official and thus subject to being replaced. Marty Kraimer "Leonard J. Reder" wrote: > > Hi, > > A colleague is looking into using a picomotors for optical alignment. > We are interested in knowing if anyone has developed EPICS device > support > for the GreenSpring IP-488 industry pack module and the New Focus > 8732 multi-axis pico motor controller. The New Focus controller is > a GPIB device and special commands are required to be sent to the > picomotors for positioning. > > Also just support for the IP-488 module would be useful. Also have > any of you had particularly bad experience with the Greenspring IP-488 > module. I would be interested in knowing about potential problems > with utilizing GPIB. > > Any and all replies are greatly appreciated. > > Len > > -- > ____________________________________________________ > Leonard J. Reder > Jet Propulsion Laboratory > Interferometry Systems and Technology Section 383 > Email: [email protected] > Phone (Voice): 818-354-3639 > ____________________________________________________