EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: [Fwd: Interrupt Epics Driver]
From: Wolfgang Maschmann <[email protected]>
To: [email protected]
Date: Tue, 17 Apr 2001 13:52:45 +0200

-------- Original Message --------
Subject: Interrupt Epics Driver
Date: Wed, 11 Apr 2001 16:07:42 +0800
From: Weixing Cheng <[email protected]>
To: [email protected]

Hello, everyone:
    I have developed the epics driver for AcromagAVME9321, which is a 12
bit AD card.it was working under the continuous mode. Now I want to use
the interrupt mode, what should I deal with the driver code and .db file
? Thank you for your suggestion.

Cheng Weixing


Replies:
Re: [Fwd: Interrupt Epics Driver] Benjamin Franksen

Navigate by Date:
Prev: Re: Interrupt on MV2302 Marty Kraimer
Next: Re: [Fwd: Interrupt Epics Driver] Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: help about PENTEK 4284/4257 module? shen guobao
Next: Re: [Fwd: Interrupt Epics Driver] Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024