1994 1995 1996 1997 1998 1999 2000 <2001> 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 <2001> 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Tektronix TDS 3000, TDS 3EM, VXI-over-TCP/IP |
From: | Eric Norum <[email protected]> |
To: | Carl Lionberger <[email protected]> |
Cc: | Epics Tech-Talk <[email protected]> |
Date: | Wed, 11 Jul 2001 16:19:45 -0600 |
Carl Lionberger wrote: > > Anybody have EPICS drivers for talking to TDS 3000 oscilloscopes through > their TDS 3EM ethernet adapter? Or even a driver for VXI-11 (TCP/IP > Instrument Protocol), which is the protocol it uses? > Will the Agilent E2050A GPIB/LAN driver work for this? The driver talks VXI-11 and now runs on host or target IOCs with R3.14. Some small changes are certainly necessary since the E2050A driver telnets to the device to issue a reset command on startup, but I would expect the VXI-11 part of the driver to work. -- Eric Norum [email protected] Department of Electrical Engineering Phone: (306) 966-5394 University of Saskatchewan FAX: (306) 966-5407 Saskatoon, Canada.