1994 1995 1996 1997 1998 1999 2000 2001 <2002> 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 <2002> 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Agilent E2050B LAN/GPIB gateway no longer available |
From: | Noboru Yamamoto <[email protected]> |
To: | "Rarback, Harvey" <[email protected]> |
Cc: | "'[email protected]'" <[email protected]>, "Tony Cox ([email protected])" <[email protected]>, "Doug Keeley ([email protected])" <[email protected]>, "Wermelskirchen, Clemens" <[email protected]>, "Boussina, PJ" <[email protected]>, "Corbett, William J." <[email protected]>, "George, Martin" <[email protected]>, "Hettel, Bob" <[email protected]>, "Johnson, Leif Eric" <[email protected]>, "Safranek, James" <[email protected]>, "Sebek, Jim" <[email protected]>, "Straumann, Till" <[email protected]>, "Terebilo, Andrei" <[email protected]>, "Wachter, John" <[email protected]> |
Date: | Wed, 25 Sep 2002 11:08:48 +0900 |
Rarback, Harvey wrote: > Folks, > > I just found out that the Agilent (HP) E2050B LAN/GPIB gateway is no longer available and since April has been "replaced" by the E5810A LAN/GPIB Gateway for Windows(r) 98/Me/NT(tm)/2000/XP. Tech support at Agilent is not sure whether there have been any protocol changes between the two boxes. > > Has anyone any experience with the E5810A, especially whether the existing drivers work with it? > > Thanks. > --Harvey > We have tested E5810A with EPICS E2050B support and confirmed it works with it. You may need to change a startup script or setting of E5810A, though. The default "GPIB SICL Interface name" on HP2050A is "hpib" whereas it on HP5810A is "gpib0". After changing "hpib" in drvHpGpibConfig command in the startup script to "gpib0". EPICS software can establish the link and can control GP-IB devices under the LAN-GPIB box, HP5810A. We are going to test the HP 5810A in more detail. Regards, Noboru Yamamoto EPICS group/KEKB control Group KEK, JAPAN