Experimental Physics and Industrial Control System
the main problem is that EPICS is a large full toolbox of things and
every single installation is using different tools and different parts
to achieve different things. So - other than with a standard pc or your
CD player - there is no way to create a simple one page instruction
poster. Also in most cases building a control system is slightly more
complicated than plugging your computer into the wall.
It's like with any toolbox: you will have to get to know and understand
the tools to get something going.
On the other hand there is a common minimal set of tools that probably
all installations are using. The chapters 2 and 3 of the Application
Developer's Guide give a reasonable introduction. An example application
that is part of EPICS base that will get you started with a small
running EPICS system almost immediately. There is a README file on the
main doc web page that contains necessary information to compile and run
EPICS base and the example. Read it.
Last not least: EPICS is a collaboration. As soon as you are able to put
all the necessary information together on a nice poster, we will be more
than happy to integrate it into the EPICS release. Everyone will love
you for doing that. (I can't promise kisses, though.)
>>>>> "Mike" == Mike A Larson <email@example.com> writes:
> I am in search of some basic common denominator instructions for setting up
> an EPICS system. I am currently running Red Hat 7.3. Most of the
> instruction and tutorial do not go into good detail. I am searching for
> something close to that Dell poster that you get telling you how to plug
> your computer into the wall. Most of the installation instructions I have
> found thus far consist of comments like "Now go for the gusto and compile"
> I guess I am looking for everything up to and including this compile step.
> Thanks and pardon my ignorance,
> Michael Larson
- EPICS Setup/Installation Mike A. Larson
- Navigate by Date:
OMS 58 and auxiliary outputs Rok Sabjan
Re: Where is caput? Andy Foster
- Navigate by Thread:
EPICS Setup/Installation Mike A. Larson
[no subject] psichta