EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: R3.14.1 build on SunOS 5.8 sparc
From: Geoff Savage <[email protected]>
To: "'[email protected]'" <[email protected]>
Date: Mon, 31 Mar 2003 16:14:46 -0600
Hi,

I started to perform R3.14.1 builds on SunOS 5.8 sparc. The host build completed with no errors. The warnings did not appear to be of any importance. Then I added CROSS_COMPILER_TARGET_ARCHS=vxworks-ppc603 to CONFIG_SITE and the following message appeared.

gmake[3]: Entering directory `/usr/products/devel/savage/epics/base-3.14.1/src/libCom/O.vxworks-ppc603'
gmake[3]: *** No rule to make target `../O.Common/osiFileName.h', needed by `inc'. Stop.

There is no file /usr/products/devel/savage/epics/base-3.14.1/src/libCom/O.vxworks-ppc603/osiFileName.h.

Suggestions please?

Thanks

Geoff


Replies:
Re: R3.14.1 build on SunOS 5.8 sparc Janet Anderson
Navigate by Date:
Prev: Re: Building 3.14.1 for MVME5100 (Internal compiler error) Andrew Johnson
Next: Re: R3.14.1 build on SunOS 5.8 sparc Janet Anderson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Building 3.14.1 for MVME5100 (Internal compiler error) Andrew Johnson
Next: Re: R3.14.1 build on SunOS 5.8 sparc Janet Anderson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024