Experimental Physics and Industrial Control System
Subject: |
how to prevent ioc app from being built for both target and host? |
From: |
"M.C.Shao" <[email protected]> |
To: |
"Tech-talk" <[email protected]> |
Date: |
Mon, 14 Apr 2003 17:00:55 +0800 |
hi, all,
I am building a rtems application with some hardware device/driver support. And the host arch is linux-x86,while the target is rtems-pc386.
I must invoke rtems APIs in my device support, so I have to include header files of rtems in my device support source, such as "#include <rtems.h>". Then some codes in the device support are target arch related. But the Makefile created by "makeBaseApp.pl" are still trying to build the application for both host(linux-x86) and target(rtems-pc386).
How to turn off this feature of the building system?
thanks.
- Replies:
- Re: how to prevent ioc app from being built for both target and host? Marty Kraimer
- Re: how to prevent ioc app from being built for both target and host? Till Straumann
- Navigate by Date:
- Prev:
Hexadecimal/Octal display on medm/dm2k Noboru Yamamoto
- Next:
ways to add driver support layer for rtems ioc M.C.Shao
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Hexadecimal/Octal display on medm/dm2k Noboru Yamamoto
- Next:
Re: how to prevent ioc app from being built for both target and host? Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024