1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | drvAscii R3.14 version |
From: | "Porter, Rodney R." <[email protected]> |
To: | <[email protected]> |
Date: | Mon, 14 Apr 2003 10:41:47 -0500 |
How do I get drvSerial/drvAscii for R3.14?
I ask because of the following response to the Serial Driver for LINUX thread.
Note: I have implemented the parsing of checksums in drvAscii v. 2.2 with no problems. They have added a user definable pre-parser that can handle this.
1. Use of drvSerial/ drvASCII (thanks to Paul Tyler and Kevin Tsubota who sent to me the R3.14 version). It works fine. But, due to the very general protocol of drvASCII, it is neither possible to implement the checksum policy of the FP (fieldpoint) protocol, nor the check of the module responses. On the other hand, this approach is very convenient to test individual FP commands on the fly (particularly useful to understand the different types of commands, parameters etc..)
Rodney Porter Scientific Associate - Data Acquisition Intense Pulsed Neutron Source Division Argonne National Laboratory Bldg. 360, Rm. C-209 9700 S. Cass Ave. Argonne, IL 60439 (630) 252 - 7151 (630) 252 - 4163 fax
|