EPICS Building a 3.13 app with 3.14 base

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Building a 3.13 app with 3.14 base
From:	Geoff Savage <[email protected]>
To:	"'[email protected]'" <[email protected]>
Date:	Fri, 15 Aug 2003 10:44:00 -0500

Hi,

I'm in the process of building the record, device, and driver support developed here at Fermilab against R3.14.2. I'm finding that our source files are missing some header files and was wondering if this the typical issue with building 3.13 apps with 3.14 base. Most of the headers were imported via recSup.h which includes recGbl.h.

Thanks

Geoff

Replies:: Re: Building a 3.13 app with 3.14 base Andrew Johnson

Navigate by Date:: Prev: Re: building ChannelArchive1.9.1 on redhat linux9.0 Kay-Uwe Kasemir; Next: Re: Building a 3.13 app with 3.14 base Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: building ChannelArchive1.9.1 on redhat linux9.0 Kay-Uwe Kasemir; Next: Re: Building a 3.13 app with 3.14 base Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024