Experimental Physics and Industrial Control System
Hi,
As the subject says I am attempting to build R3.13 extensions with
R3.14.5. I am following the instructions at
http://www.aps.anl.gov/epics/modules/base/R3-14/5-docs/BuildingR3.13ExtensionsWithR3.14.html
with no success. Here are the error messages.
[savage@d0ol30 extensions]$ gmake
stat(): No such file or directory at ./config/fullPathName.pl line 6
stat(): No such file or directory at ./config/fullPathName.pl line 6
gmake -C configure buildInstall
gmake[1]: Entering directory
`/mnt/nobackup/home/savage/extensions/configure'
gmake -C O.linux-x86 -f ../Makefile TOP=../.. T_A=linux-x86 buildInstall
gmake[2]: Entering directory
`/mnt/nobackup/home/savage/extensions/configure/O.l
inux-x86'
gmake[2]: Nothing to be done for `buildInstall'.
gmake[2]: Leaving directory
`/mnt/nobackup/home/savage/extensions/configure/O.li
nux-x86'
gmake[1]: Leaving directory `/mnt/nobackup/home/savage/extensions/configure'
gmake -C src buildInstall
stat(): No such file or directory at ../config/fullPathName.pl line 6
stat(): No such file or directory at ../config/fullPathName.pl line 6
gmake[1]: Entering directory `/mnt/nobackup/home/savage/extensions/src'
gmake -C alh buildInstall
stat(): No such file or directory at ../../config/fullPathName.pl line 6
stat(): No such file or directory at ../../config/fullPathName.pl line 6
gmake[2]: Entering directory `/mnt/nobackup/home/savage/extensions/src/alh'
perl
/d0usr/products/epics/NULL/base-3.14.5/bin/linux-x86/makeMakefile.pl O.linu
x-x86 Host
Can't open perl script
"/d0usr/products/epics/NULL/base-3.14.5/bin/linux-x86/mak
eMakefile.pl": No such file or directory
gmake[2]: *** [O.linux-x86] Error 2
gmake[2]: Leaving directory `/mnt/nobackup/home/savage/extensions/src/alh'
gmake[1]: *** [alh.buildInstall] Error 2
gmake[1]: Leaving directory `/mnt/nobackup/home/savage/extensions/src'
gmake: *** [src.buildInstall] Error 2
[savage@d0ol30 extensions]$ printenv HOST_ARCH
Linux
[savage@d0ol30 extensions]$ cat config/RELEASE
#RELEASE Location of external products
#
EPICS_EXTENSIONS=$(TOP)
#EPICS_BASE=/usr/local/iocapps/R3.13.9/support/base/3-13-9-asd1
#EPICS_BASE=/usr/local/iocapps/R3.14.5/support/base/3-14-5-asd1
EPICS_BASE=/d0usr/products/epics/NULL/base-3.14.5
The file ./config/fullPathName.pl does indeed exists in the extensions
area. The makeMakefile.pl was not installed in the base-3.14.5 build.
Any suggestions?
I'm going to try and use the makeBaseExt.pl script to create a new
extensions area.
Thanks for the support.
Geoff
- Replies:
- Re: building R3.13 extensions with R3.14.5 Andy Foster
- Navigate by Date:
- Prev:
Re: ANSI compilation error for ppc604 target. Andrew Johnson
- Next:
RTEMS BSP for MVME5500 Kate Feng
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: ANSI compilation error for ppc604 target. Andrew Johnson
- Next:
Re: building R3.13 extensions with R3.14.5 Andy Foster
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024