Experimental Physics and Industrial Control System
Hello Kate,
Mr OH was successfully compile and loding epics base3.14.6 and asyn3.2 application based your binary BSP and utility.
It is very nice toolset for starting for easily compile and testing applications.
Did you tested Marty's asyn3.2 code with RTEMS and what kind hardware (e.g. RS232 board) for your Motor driver testing?
Best wishes,
Kiman,
PLS Control and taskforce team.
>
>
> -----Original message-----
> From: "Siddons, David"
> To: "'Kate Feng '" ,"'[email protected] '" ,"'[email protected] '"
> Cc: "'[email protected] '" ,"'[email protected] '"
> Date: 07/28/2004(Wed)02:58
> Subject: RE: RTEMSfor MVME5500
>
> Hi Kiman
> I would strongly recommend getting the tool binaries, especially for someone
> starting out with RTEMS. It saved me endless trouble when I first started.
> Pete.
>
- Replies:
- Re: RTEMSfor MVME5500 Kate Feng
- Navigate by Date:
- Prev:
RE: CA Gateway problem Jeff Hill
- Next:
Re: CA Gateway problem Dirk Zimoch
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Wanted: CONFIG.Vx for MVME2100 Eric Williams
- Next:
Re: RTEMSfor MVME5500 Kate Feng
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024