Experimental Physics and Industrial Control System
Subject: |
EPICS drivers for DAC/ ADC Industry Packs on a PCI carrier board |
From: |
Dorothea Wehler <[email protected]> |
To: |
[email protected] |
Date: |
Fri, 13 Aug 2004 14:36:09 +0200 |
Hello,
we want to use a Linux PC as an IOC (base-3.14.6) and would like to
install Industry Packs with 16bit A/D and D/A converters respectively
with a throuput of >=100kHz on a PCI carrier board.
We shortlist the following devices: carrierboard: PCI-40A from SBS,
D/Aconverter: IP235 from Acromag, A/Dconverter: IP-ADC-8401 from Hytec.
We would be grateful, if someone uses these or similar devices and would
be able to make the necessary drivers available to us.
Kind regards
Dorothea Wehler
---------
Dr. Dorothea Wehler
Cryoelectra GmbH
Linde 72-74
D-42287 Wuppertal
Germany
Tel: +49 202 / 69824-20
Fax: +49 202 / 69824-40
- Navigate by Date:
- Prev:
Re: Anyone have Channel Access for Perl going? Mohan Ramanathan
- Next:
Re: RTEMSfor MVME5500 Kate Feng
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
- Navigate by Thread:
- Prev:
Re: Anyone have Channel Access for Perl going? Mohan Ramanathan
- Next:
Industry Pack support under RTEMS available? Dorothea Wehler
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025