Experimental Physics and Industrial Control System
Subject: |
Problem restoring some PVs with burtwb |
From: |
Burkhard Kolb <[email protected]> |
To: |
tech-talk Mailing List <[email protected]> |
Date: |
Thu, 4 Nov 2004 14:49:27 +0100 |
I have a set of ao-records which I want to write to with burtwb.
These records use the device support CAEN_IO for CAEN SY527 HV modules.
I can set the values via medm or ca_test.
When I use burtwb the values are not touched at all. The burtwb logfile
indicates all is well, connected to all channels, all values written.
I enabled the process printout on one of these records, it gives 1
message
when I change the PV with medm, it gives 7 (why?) messages when used
with ca_test and NONE with burtwb.
burtrb can read the values without any problem.
There is no access security problem, no network problem.
Other ao-records with different device support do work with burtwb.
EPICS base is 3.13..0, burt version?? from Aug 2002
Any clue how to debug this?
Burkhard Kolb
HADES @ GSI Darmstadt
- Navigate by Date:
- Prev:
RE: asynInt32SyncIO readOnce Mark Rivers
- Next:
Re: Channel Access Protocol Specification Klemen Zagar
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: asynInt32SyncIO readOnce Mark Rivers
- Next:
asyn3-3 external access Geoff Savage
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024