EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: RE: Modbus/TCP for Linux
From: Ivan So <[email protected]>
To: [email protected], [email protected]
Date: Mon, 13 Dec 2004 17:12:32 -0500
Hi Paul,

For the BNL/NSLS beamline-controls, we have modified the TRIUMF's version of
the "Modbus/TCP for VxWorks" to run with the WAGO PLCs under Linux more
than a year ago. Since then, it has not been our priority to polish it more.

Triggered by your last posting on the subject, we have upgraded the linux port to EPICS 3.14.6
under Debian Sarge and Linux 2.6.8.1. If that is useful to you, we may upload it to
our website for download.

The code has not been well integrated for distribution. Yet it is working reliably with our
WAGO hardware.

Ivan So
BNL/NSLS
[email protected]
Navigate by Date:
Prev: Re: Is anybody investigating using state-full web services with EPICS APIs? Pete R Jemian
Next: Base R3.14.7 available Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: Fw: Modbus/TCP for Linux Paul Sichta
Next: RE: Modbus/TCP for Linux Ivan So
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025