Experimental Physics and Industrial Control System
I have just produced a new release of drvIpac, version 2.8 requires
vxWorks and EPICS Base 3.14.3 or later. The main changes are:
* Added a carrier driver for the Tews TVME200 carrier board (a.k.a. the
SBS VIPC626)
* Fixed the problem with port 7 of a tyGSOctal module hanging up when
run from an MVME5100 CPU board
* Improved robustness against faulty hardware or configuration
parameters by providing a routine ipacLatestCarrier(), and always
incrementing the carrier number even if a carrier initialization fails
* A new irqCmd ipac_slotReset is available for carrier boards that are
capable of resetting an individual IP slot, i.e. the TVME200 only.
Available from the usual place:
http://www.aps.anl.gov/asd/people/anj/ipac/
- Andrew
--
Dear God, I didn't think orange went with purple until I saw
the sunset you made last night. That was really cool. - Caro
- Navigate by Date:
- Prev:
Re: antelope on Solaris 9 Andrew Johnson
- Next:
RE: number of monitors Matej Sekoranja
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: antelope on Solaris 9 Andrew Johnson
- Next:
Omron CJ1M PLC - Ethernet Driver Al Grippo
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024