EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: Re: Who is using what EPICS version
From: Noboru Yamamoto <[email protected]>
To: John Dobbins <[email protected]>
Cc: [email protected]
Date: Tue, 08 Mar 2005 08:52:51 +0900
Hi,

Here is some information on KEK/KEKB project.

Noboru

Site: KEK, Japan
Project:KEKB (Operational)EPICS Version:3.13.x + with KEKB enhancement. x is somewhere between 1 and 6.
Host OS and Version: HP-UX 10.2/11.0 / OSF1 v5.1/ Linux(mostly RH) /Darwin(MacOSX) 10.3.x
Target OS and Version:VxWorks 5.3.1
Target Processor:Force PowerCore 6750/CPU-64 will introduce PowerCore695 soon
Field Buses: Arcnet/GPIB/Serial/VXI-MXI/CAMAC
Comments:



References:
Who is using what EPICS version John Dobbins
Navigate by Date:
Prev: RE: dm and edm problems with CA gateway Kenneth Evans, Jr.
Next: about Tektronix TDS3000 series oscilloscopesdevice device support liushu
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: Re: Who is using what EPICS version Ernest L. Williams Jr.
Next: Re: Who is using what EPICS version Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025