EPICS Re: Support for room temperature and humidity sensors

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	Re: Support for room temperature and humidity sensors
From:	Maren Purves <[email protected]>
To:	"J. Lewis Muir" <[email protected]>
Cc:	[email protected]
Date:	Tue, 22 Mar 2005 08:03:58 -1000 (HST)

We have serial line units made by Vaisala, model # escapes me right now (writing this from home). They work well and we have capfast schematics (3.13.8). They don't need extra device support or drivers.

Maren

On Tue, 22 Mar 2005, J. Lewis Muir wrote:

Are there room temperature and humidity sensors that are supported in
EPICS?

I would like to have a room temperature and humidity sensor in an
end-station and monitor it with EPICS just like monitoring or
controlling any other beamline device.

Thanks!

Replies:: Re: Support for room temperature and humidity sensors J. Lewis Muir

References:: Support for room temperature and humidity sensors J. Lewis Muir

Navigate by Date:: Prev: Support for room temperature and humidity sensors J. Lewis Muir; Next: Re: CA gateway failure Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: Support for room temperature and humidity sensors J. Lewis Muir; Next: Re: Support for room temperature and humidity sensors J. Lewis Muir; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025