EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: how to import Oratcl to et_wish
From: huangsong <[email protected]>
To: [email protected]
Date: Mon, 06 Jun 2005 09:48:07 +0800
Hello,

Is there anyone who have added Oratcl to et_wish?

I added a call to "Oratcl_Init(interp)" to $EPICS_EXTENSIONS/src/caTCL/interpreters/et_wishAppInit.c module.
And modified the Makefile.Host file to link libOratcl.so like this:

PROD_LIBS_DEFAULT =  BLT tk tcl ca Com X11 Oratcl4.3
Oratcl4.3_DIR = /usr/local/lib/Oratcl4.3


Then I have the new et_wish. But when I run it, it only produce a core file.

Can anyone give me some indications?


Best wishes and regards,
Huang song
IHEP

                                         [email protected]
					 2005.06.06


Navigate by Date:
Prev: Re: RTEMS booting problem under uCdimm5282 module. Eric Norum
Next: epics on ecos Geoff Savage
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: RTEMS booting problem under uCdimm5282 module. Eric Norum
Next: epics on ecos Geoff Savage
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024