EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: Re: Suitable PC104 board for EPICS/Linux
From: Motoki Ooi <[email protected]>
To: [email protected]
Date: Fri, 19 Aug 2005 09:29:43 +0900
Hello Deninson,

In our system, we use PCM-9370 as EPICS IOC.
PCM-9370 uses Crusoe TM5600-500 processor and 64 MB system memory with extra up to 256 MB.
Compact flush card is able to use as a main drive.
This SBC is used for CC/NET (network CAMAC controller) and shows enough performance for us.

You can see about PCM-9370 here.
http://www.advantech.com.tw/products/Model_Detail.asp?model_id=1-TQMMQ&BU=ACG&PD=

This URL is about CC/NET (TOYO CORPORATION.) and you may find Linux recovery iso image for CC/NET.
http://www.toyo.co.jp/daq/index.html

Motoki Ooi


References:
Suitable PC104 board for EPICS/Linux Denison, PN (Peter)
Navigate by Date:
Prev: Re: subArray processing (when comments and code disagree) Ralph Lange
Next: Re: Suitable PC104 board for EPICS/Linux Jack
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: Suitable PC104 board for EPICS/Linux Denison, PN (Peter)
Next: Re: Suitable PC104 board for EPICS/Linux Jack
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025