Re: Driver for Sorenson PS - DLM Series

[Eric Norum <norume@aps.anl.gov>]

On Nov 7, 2005, at 6:12 PM, Martin Pieck wrote:

> Hello,
>
> Has anybody developed a driver that communicates with Sorenson
>
> DLM Series (M130 Ethernet Option) Power Supplies ???
>
> According to the manual this should be possible via one of the
>
> following methods:
>
> -       raw socket interface sending delimited strings (SCPI)
This is supported by the ASYN drvAsynIPPort driver.

> -       utilizing VXI-11 Discovery protocol
The ASYN drvVxi11 driver should be close to what's needed here.  It  
would be great to hear what success you have with this since LXI (Lan  
eXtensions for Instrumentation) is built on this protocol.

> -       web-server
> -       RS232C
drvAsynSerial


In all the above cases you need "only" to write the ASYN devGpib  
command table entries.  The same command table should work for all  
three communication mechanisms.

--
Eric Norum <norume@aps.anl.gov>
Advanced Photon Source
Argonne National Laboratory
(630) 252-4793