Experimental Physics and Industrial Control System
On Fri, 2006-04-14 at 17:09 -0700, Emmanuel Mayssat wrote:
> On Fri, 2006-04-14 at 17:30 -0400, Ernest L. Williams Jr. wrote:
> > Hi All,
> >
> >
> > We are able to setup the alarm handler to run in global mode in the
> > control room but want to see global acknowledgments outside the control
> > room.
>
> global mode? Global acknoeledgement. Was is that ?
The following is from the alh User's Guide:
===============================================================================
Global Mode
The 'âglobal' options specifies that the alarm handler should run in a
global mode. In global mode an Alarm
Channel's unacknowledged severity and it's acknowledge transients state
will be determined by the current
value of the EPICS database record's ACKS and ACKT field settings. In
local mode, the default mode, the
unacknowledged severity and acknowledge transients settings are local to
the alarm handler.
===================================================================================
Maybe, I can use the "-global" flag along with the passive "-S" flag,
hmmm?
The following is again from the alh User's Guide:
==================================================================================
Passive Mode
Specifying this 'âS' option means that the alh will execute in a passive
(monitor) mode. This means that alh
can not send channel access acknowledgment of alarms and can not do
channel access puts to the
acknowledge transients fields and cannot write to the severity process
variable. It is useful for a nonâoperator
alh user.
===================================================================================
Thanks,
Ernest L. Williams Jr.
SNS Control Systems Group
ORNL
>
>
- References:
- Alarm Handler in Global mode in and outside the control room Ernest L. Williams Jr.
- Navigate by Date:
- Prev:
Alarm Handler in Global mode in and outside the control room Ernest L. Williams Jr.
- Next:
Re: AlarmHandler - filtering vs. HYST Terry Carlino
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Alarm Handler in Global mode in and outside the control room Ernest L. Williams Jr.
- Next:
CAJ 1.0.4 issues Chu, Paul C.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024