Experimental Physics and Industrial Control System
Hello,
I am not familiar with the epics sequencer.
I would like to control for the following:
If analog output0 is below 4
then set analog output1 to 30
and analog output2 to 25
I have process variables for all those values.
With EPICS records to do the above, I can use a
calc + a fanout + a sequencer.
But why not use this simple state diagram to be introduced to state
notation language and the epics sequencer ?
I have the SNL & Seq user's guide. ( but I never opened it)
I do not know anything about SNL and Seq, but I understand state
diagrams.
I have the epics base and a few extensions (if the sequencer needs to be
installed then it is most likely not installed)
I am not stupid (strong assumption here ;-) and can learn new things at
an normal pace
How long will it take me to do the above with the epics sequencer?
Is there another method to accomplish what I want to do?
Thanks,
--
Emmanuel Mayssat
Cell: 650/793-0626
Lyncean Technologies, Inc.
"See the invisible"
- Replies:
- Re: Sequencer intro needed ! Eric Norum
- Navigate by Date:
- Prev:
RE: Problem resolving symbols during build. Mark Rivers
- Next:
Re: Sequencer intro needed ! Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Problem resolving symbols during build. Mark Rivers
- Next:
Re: Sequencer intro needed ! Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024