Steven,
I am not familiar with the gateway code and this is likely not your
problem but it may give you some idea's, I have been able to crash our
gateway when the EPICS_CA_MAX_ARRAY_BYTES environ var is not set and you
try to pull a waveform or analog array back through the gateway, I think
the default is 16k bytes, this needs to be set on the IOC and wherever
your GUI is. Again I don't recall any messages about pthread_create
calving, but setting the max bytes to a value large enough made the
gateway happy.
When you dial back the number of connections the problem goes away? if
so, at what number of connections does it die?
-Russ
------------------------------------------------------------------------
From: Steven Banks [mailto:[email protected]]
Sent: Monday, June 26, 2006 12:57 AM
To: [email protected]
Subject: Gateway Crashes
We are having severe problems with the EPICS gateway, and I'm hoping
that someone can help us resolve them.
The problem is that the gateway is continually crashing whenever we open
up a GUI display with requires connection to multiple IOCs. These are
Libera BPM boxes, and we have 98 of them. We have a status display
which shows the status of 33 of these at once. As we scroll from one
display to the other, the gateway invariably crashes.
(This is a gateway between our office network and our accelerator
network, and is used for monitoring the status of the machine from our
desktops.)
The gateway log provides the following information:
***************************************************************
Jun 26 16:01:02 PV Gateway Version 2.0.0.0 [Jun 14 2006 15:10:22]
EPICS 3.14.6 PID=8840 ServerPID=8839
EPICS_CA_ADDR_LIST=BROADCAST-ACC
EPICS_CA_AUTO_ADDR_LIST=NO
EPICS_CA_SERVER_PORT=Not specified
EPICS_CA_MAX_ARRAY_BYTES=Not specified
EPICS_CAS_INTF_ADDR_LIST=CR01GW01-OFFICE
EPICS_CAS_SERVER_PORT=Not specified
EPICS_CAS_IGNORE_ADDR_LIST=Not specified
Running as user ics on host CR01GW01
Statistics PV prefix is CR01GW01
pthread_create error Cannot allocate memory
Jun 26 16:36:12 !!! Errlog message received (message is above)
fatal error: epicsThreadCreate
Jun 26 16:36:12 !!! Errlog message received (message is above)
***************************************************************
Has anyone else seen the memory problems that we are experiencing? Is
this an indication that we are trying to connect to too many PVs at
once? Will purchasing more memory for the gateway perhaps alleviate the
problem. It currently has 512MB but we are planning to upgrade it to 1 GB.
Dr. Steven M. Banks – Control Systems Engineer
Australian Synchrotron Project
Major Projects Victoria
800 Blackburn Road
CLAYTON VIC 3168
tel: +613 8540 4103
fax: +613 8540 4200
mailto:[email protected]
http://www.synchrotron.vic.gov.au <http://www.synchrotron.vic.gov.au/>