EPICS Re: Smooth transition from medm to edm

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: Smooth transition from medm to edm
From:	Ralph Lange <[email protected]>
To:	Emmanuel Mayssat <[email protected]>
Cc:	epics <[email protected]>
Date:	Fri, 11 Aug 2006 09:45:36 +0200

Emmanuel,

Jefferson Lab (in close cooperation with the edm authors) developed an adl-to-edl (medm-to-edm) converter. This tool can be used as a filter on the edm command line, i.e. medm files are converted on-the-fly and handed to edm for display.

Find the tool on the edm home page at http://ics-web1.sns.ornl.gov/edm/ - good luck!

Hope this helps,
Ralph

Emmanuel Mayssat wrote:

Hello,

Is it possible to smoothly more from medm to edm (i.e. open edm displays from medm, or medm displays from edm)? or do I have to convert all of my display files at once ?

References:: Smooth transition from medm to edm Emmanuel Mayssat

Navigate by Date:: Prev: Re: VME Bus Error handling on MVME3100 and 6100 boards Till Straumann; Next: Porting EPICS to NetBSD David Dudley; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Smooth transition from medm to edm Emmanuel Mayssat; Next: VME Bus Error handling on MVME3100 and 6100 boards Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024