Experimental Physics and Industrial Control System
Hi,
It looks like SIMM mode for mbbiDirect records does not work in epics 3.14
generating "Invalid" severity state.
Simple setup is shown below:
record(longin,"CTL_VS/SET") {
field(DTYP, "Soft Channel")
field(SCAN, "1 second")
field(FLNK, "CTL_VS/MBBI")
field(VAL,"1")
field(PINI,"YES")
}
record(mbbiDirect,"CTL_VS/MBBI") {
field(DTYP, "Raw Soft Channel")
field(INP, "2")
field(SCAN, "Passive")
field(NOBT, "16")
field(SHFT, "0")
field(SIMM, "YES")
field(SIOL, "CTL_VS/SET")
field(FLNK, "CTL_VS/LONGIN")
}
record(longin,"CTL_VS/LONGIN") {
field(DTYP, "Soft Channel")
field(INP, "3")
field(SCAN, "Passive")
field(SIMM, "YES")
field(SIOL, "CTL_VS/SET")
}
The record CTL_VS/MBBI is always in "Invalid" state while longin
CTL_VS/LONGIN is ok
Did anyone see it?
Vladimir
- Replies:
- Re: SIMM mode for mbbiDirect record Kay-Uwe Kasemir
- Navigate by Date:
- Prev:
-- Device support and driver for ICV196 R3.14.8.2 -- jerome HOSSELET
- Next:
Re: SIMM mode for mbbiDirect record Kay-Uwe Kasemir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
-- Device support and driver for ICV196 R3.14.8.2 -- jerome HOSSELET
- Next:
Re: SIMM mode for mbbiDirect record Kay-Uwe Kasemir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024