Experimental Physics and Industrial Control System
Hi,
I'm trying to use a GPIB device via the VXI11 Agilent E5810A, by using the ASYN support for the E5810A. So in my IOC start up file I have:
iocshCmd("vxi11Configure L0 172.23.116.185 0 0.0 gpib0 0 0")
but at start up I get:
2007/06/15 15:17:53.852 L0 vxiConnectPort error 172.23.116.185: RPC: Program not registered
2007/06/15 15:17:53.852 asynManager::asynConnectCallback, port L0 error calling asynCommon->connect
2007/06/15 15:17:53.852 L0 vxiConnectPort error 172.23.116.185: RPC: Program not registered
2007/06/15 15:17:53.852 asynManager::asynConnectCallback, port L0 error calling asynCommon->connect
2007/06/15 15:17:53.852 L0 vxiConnectPort error 172.23.116.185: RPC: Program not registered
2007/06/15 15:17:53.852 L0 -1 autoConnect could not connect
2007/06/15 15:17:53.885 L0 vxiConnectPort error 172.23.116.185: RPC: Program not registered
2007/06/15 15:17:53.968 asynManager::asynConnectCallback, port L0 error calling asynCommon->connect
2007/06/15 15:17:54.868 L0 port not connected
2007/06/15 15:17:58.618 L0 vxi11 clientCall errno 3997698 clnt_stat 0
L0 port not connected
2007/06/15 15:17:58.618 L0 vxiConnectPort vxiBusStatus error initialization aborted
0x1ea12bc0 (L0): memPartFree: invalid block 0x1e247e80 in partition 0x265d1c.
Have people seen something like this before? I'm not sure if the E5810A is widely used or not.
The device itself is fine. The above works OK if I am using a linux IOC. Also, the VxWorks IOC can see the E5810A because it send a reboot command successfully.
Cheers,
Matthew
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0D!
E, United Kingdom
- Replies:
- Re: VXI11 ASYN problem on VxWorks Eric Norum
- Navigate by Date:
- Prev:
Re: IOC options David Kline
- Next:
Re: VXI11 ASYN problem on VxWorks Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: protocol/database macro expansion problem Pearson, MR (Matthew)
- Next:
Re: VXI11 ASYN problem on VxWorks Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024