EPICS Re: caget segment fault

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	Re: caget segment fault
From:	Geoff Savage <[email protected]>
To:	Emmanuel Mayssat <[email protected]>
Cc:	epics <[email protected]>
Date:	Mon, 09 Jul 2007 14:25:56 -0500

Make sure the running caRepeater application is from the same epics version as caget. You could be running the 3.14.6 caRepeater when using the other two releases.

For more info on caRepeater see Ralph's email on "beacons" from this morning.

Geoff

On Jul 9, 2007, at 1:54 PM, Emmanuel Mayssat wrote:

Hellom

I am trying to compile epics base 3.14.8.2 and 3.14.9 on redhat 8.0
After compilation, caget <PV> (most of the time) returns a value and
immediately segment fault.
Compilation of 3.14.6 works great.
Any idea what that could be?
--
Emmanuel

Replies:: RE: caget segment fault Jeff Hill

References:: caget segment fault Emmanuel Mayssat

Navigate by Date:: Prev: caget segment fault Emmanuel Mayssat; Next: RE: CA Beacon, error messages when sending Jeff Hill; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: caget segment fault Emmanuel Mayssat; Next: RE: caget segment fault Jeff Hill; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025