Re: Embedded EPICS IOC

[Mauro Giacchini <Mauro.Giacchini@lnl.infn.it>]

In the EPICS wiki-pages there is a document which may give you someone 
hints:

http://www.aps.anl.gov/epics/wiki/index.php/HowToPC104

Hope this helps
Mauro.

David DeBonis wrote:
> We are working on an embedded EPICS IOC deployment but are running 
> into some confusion on what is necessary to build to our target 
> architecture which is ARM running a linux kernel 2.6.x. We have our 
> own cross-compilers that we would like to use and build with but we 
> seem to be running into issue with some post-build executables that 
> need to be run on the target.
> Can someone clarify what EPICS binaries are necessary to be deployed 
> to the target to run as a "Soft IOC" standalone? Also, can we 
> cross-compile all we need on our host system yet run fully standalone 
> on the target?
> Just to be clear, we are not running as a slave target to a host 
> computer but as a fully standalone embedded host IOC.
> Any clarification is deeply appreciated.
> *David DeBonis*
> Principal Software Engineer
> ZTEC Instruments, Inc.
> Phone: 505-342-0132 x133
> Fax: 505-342-0222
> ddebonis@ztecinstruments.com <mailto:ddebonis@ztecinstruments.com>

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mauro Giacchini
Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro
V.le dell?Universita', 2
35020 LEGNARO (PD) ? ITALY
Tel. +39.049.8068558
Fax. +39.049.641925
EPICS official distribution: LivEPICS 
http://www.aps.anl.gov/epics/distributions/index.php
EPICS@LNL : http://www.lnl.infn.it/~epics/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~