TDS3012B scope

[John Sinclair <sinclairjw@ornl.gov>]

All,

I'm trying to use async device support for a TDS3012B scope. I have not 
yet configured
any device specific commands, I'm just executing vxi11Configure.

I have no idea what value vxiName should take.

For the asynSetTraceMask function, I have no idea what addr should be. I
never set anything that looks like an address.

EPICS version is 3.14.9

Asyn version is 4.8

Host is Redhat Enterprise 4

When I talk to the scope from a web page, everything is well and I can 
send it
commands properly.

Executing st.cmd gives

Starting iocInit
############################################################################
## EPICS R3.14.9 $R3-14-9$ $2007/02/05 16:31:45$
## EPICS Base built Aug 20 2007
############################################################################
iocInit: All initialization complete
vxi11Configure("L0","192.168.1.101",0,0.0,"inst0",0,0)
asynSetTraceMask("L0",-1,0x1f)
2007/08/23 14:19:05.484 L0 -1 exception 3 occurred calling exceptionUser
2007/08/23 14:19:05.486 asynManager connect queueCallback port:L0
2007/08/23 14:19:05.486 L0 addr -1 vxiConnect
2007/08/23 14:19:05.486 L0 vxiConnectPort
2007/08/23 14:19:05.494 inst0 vxiCreateDeviceLink RPC error : RPC: 
Unable to receive; errno = Connection reset by peer

2007/08/23 14:19:05.494 asynManager::asynConnectCallback, port L0 error 
calling asynCommon->connect
2007/08/23 14:19:05.495 asynManager connect queueCallback port:L0
2007/08/23 14:19:05.495 L0 addr -1 vxiConnect
2007/08/23 14:19:05.496 L0 vxiConnectPort
2007/08/23 14:19:05.502 inst0 vxiCreateDeviceLink RPC error : RPC: 
Unable to receive; errno = Connection reset by peer

2007/08/23 14:19:05.503 asynManager::asynConnectCallback, port L0 error 
calling asynCommon->connect
2007/08/23 14:19:05.504 asynManager connect queueCallback port:L0
2007/08/23 14:19:05.504 L0 addr -1 vxiConnect
2007/08/23 14:19:05.504 L0 vxiConnectPort
2007/08/23 14:19:05.511 inst0 vxiCreateDeviceLink RPC error : RPC: 
Unable to receive; errno = Connection reset by peer

2007/08/23 14:19:05.512 asynManager::asynConnectCallback, port L0 error 
calling asynCommon->connect
2007/08/23 14:19:05.512 L0 addr -1 queueRequest priority 3 not lockHolder
2007/08/23 14:19:05.513 L0 -1 autoConnect
2007/08/23 14:19:05.513 L0 addr -1 vxiConnect
2007/08/23 14:19:05.513 L0 vxiConnectPort
2007/08/23 14:19:05.520 inst0 vxiCreateDeviceLink RPC error : RPC: 
Unable to receive; errno = Connection reset by peer

2007/08/23 14:19:05.520  L0 -1 autoConnect could not connect
2007/08/23 14:19:05.521 asynManager connect queueCallback port:L0
2007/08/23 14:19:05.521 L0 addr -1 vxiConnect
2007/08/23 14:19:05.522 L0 vxiConnectPort
2007/08/23 14:19:05.528 inst0 vxiCreateDeviceLink RPC error : RPC: 
Unable to receive; errno = Connection reset by peer

2007/08/23 14:19:05.529 asynManager::asynConnectCallback, port L0 error 
calling asynCommon->connect

-------------------------------

Any ideas?

John Sinclair