Re: Installing EDM on OS X 10.4.10

["Bertrand H.J. Biritz" <bbiritz@ucla.edu>]

Here is the output for gdb - I set up the EDM environmental variables  
to be the following:

EDMBASE=/usr/local/epics/extensions/src/edm
EDMFILES=/usr/local/epics/extensions/src/edm/edmMain/
EDMHELPFILES=/usr/local/epics/extensions/src/edm/helpFiles/
EDMOBJECTS=/usr/local/epics/extensions/src/edm/setup/
EDMPVOBJECTS=/usr/local/epics/extensions/src/edm/setup/

$ gdb edm
GNU gdb 6.3.50-20050815 (Apple version gdb-573) (Fri Oct 20 15:54:33  
GMT 2006)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and  
you are
welcome to change it and/or distribute copies of it under certain  
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for  
details.
This GDB was configured as "powerpc-apple-darwin"...Reading symbols  
for shared libraries ............... done

(gdb) run
Starting program: /usr/local/epics/extensions/bin/darwin-ppc/edm
Reading symbols for shared libraries ...++..+.++++...++++ done

Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x00000008
0x0021c7dc in epicsMutex::lock (this=0x1e6ecd0) at ../../../src/ 
libCom/osi/epicsMutex.cpp:118
118             epicsMutexOsdLock(pmutexNode->id);

Sorry to say, but I am out of my element here :)

Bertrand