1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: current measurement - hardware |
From: | "Joze Dedic" <[email protected]> |
To: | <[email protected]> |
Date: | Tue, 27 Nov 2007 17:19:56 +0100 |
Hello Heinrich
Maybe you can check our solution: http://www.microioc.com/loco.htm
Here you can find pdf description: http://www.microioc.com/download/microIOC-PD-LOCO.pdf
We can measure currents in the range of 100pA - 10mA at voltages up to 10kV. You can also define interlock current value per each channel. Standard product consists of 16 modules for current measurements, but it is configurable to your applications. We also provide complete control system integration support.
It is based on current to voltage to frequency converter with integration functionality that filters out noise by itself. Question that arises to me is, what is the current readout rate you require?
You can contact us directly and we shall help you with this.
Regards,
Joze
--
|¯|_|¯|_|¯|__|¯|_|¯|___|¯|_____
Joze Dedic, Ph.D.
Chief Hardware Developer
Cosylab, Teslova 30, SI-1000 Ljubljana, Slovenia
Phone: +386 1 4776 759
www.microioc.com / www.cosylab.com