Re: latest motor record on RTEMS?

["John M. Skinner" <skinner@bnl.gov>]

I think I'm OK for now. I merged some code from the 5.3 drvOms58.cc 
(that Kate had modified for RTEMS) into the 6.1 distribution. Everything 
seems to run OK now on my test setup. It will be good when Kate's mods 
are merged into the main distribution. Thanks to all who responded to my 
post.


Mark Rivers wrote:
> It would be good to get the RTEMS modifications merged into the main distribution.  Kate, can you send them to Ron?
>  
> Mark
>  
>
> ________________________________
>
> From: tech-talk-bounces@aps.anl.gov on behalf of Kate Feng
> Sent: Tue 6/24/2008 8:25 PM
> To: John M. Skinner
> Cc: tech-talk@aps.anl.gov
> Subject: Re: latest motor record on RTEMS?
>
>
>
> John M. Skinner wrote:
>   
> > The card already runs under RTEMS with motor version 5.3 with Kate's
> > drvOms58.cc. I think it's a matter of getting her code into the driver
> > in the new motor record code. I was hoping downloading the latest
> > would have the oms58 RTEMS support already in it.
> >     
> I upgraded to R6.1, but it needed modification for RTEMS.
> I will send you my version.
>
> Cheers,
> Kate
>   
> > Till Straumann wrote:
> >     
> > > John M. Skinner wrote:
> > >       
> > > > I forgot to mention we're running OMS58 cards.
> > > >
> > > >         
> > > Have you tried Harvey's suggestion (let the card allow supervisory
> > > VME access)?
> > >
> > > Under RTEMS -- by default -- VME access is always 'supervisory'.
> > >
> > > -- T.
> > >
> > >       
>
>
>
>
>