EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: Ethernet-to-RS232
From: Dave Reid <[email protected]>
To: EPICS tech-talk <[email protected]>
Date: Tue, 08 Jul 2008 12:17:25 -0700
Hi everyone...

We are looking for an Ethernet-to-RS232 device that we can use in a manner similar to the Agilent GPIB gateway, meaning using ASYN to send messages out over our network and then out to RS232 devices.

Is anyone else doing this? Have a product that they've had good results with or any to avoid?

Thanks...

dave reid
University of Washington Medical Center
Replies:
Re: Ethernet-to-RS232 Steve Shoaf
Re: Ethernet-to-RS232 Maren Purves
Re: Ethernet-to-RS232 Graham Waters
Re: Ethernet-to-RS232 John Hammonds
Re: Ethernet-to-RS232 Mauro Giacchini
Navigate by Date:
Prev: RE: EPICS meeting in Padua Dalesio, Leo
Next: Re: Ethernet-to-RS232 Steve Shoaf
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: EPICS meeting in Padua Dalesio, Leo
Next: Re: Ethernet-to-RS232 Steve Shoaf
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025