Experimental Physics and Industrial Control System
I bought a CAN232 (EasySync) rs232 to can converter. My goal is to implement an epics soft IOC to communicate with a Wiener VME crate which has the CAN interface. So far, I am able to "talk" with the converter itself (the "V" command returns the version numbers).
I have built a simple "straight through" can cable (using pin 2, 3, and 7), terminated as recommended in the instruction manual and connected the can232 to the VME crate. When I issue a simple can command I get no response from the crate.
Has anyone used this device in a similar setup? Any ideas will be greatly appreciated.
Thanks in advance,
Zen
- Navigate by Date:
- Prev:
accessing a slice of an array field Dehong Zhang
- Next:
Re: PV Gateway Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: accessing a slice of an array field Jeff Hill
- Next:
RE: CAN232 David Beauregard
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024