Experimental Physics and Industrial Control System
On Dienstag, 30. September 2008, Silver wrote:
> I want to write a driver for one of our serial devices, so I read "How
> to create EPICS device support for a simple serial or GPIB device".
> (http://www.aps.anl.gov/epics/modules/soft/asyn/R4-9/HowToDoSerial/tutori
>al.html)
I strongly recommend using StreamDevice
(epics.web.psi.ch/software/streamdevice/) for new GPIB (or VXI-11) device
supports. It is a lot simpler to configure, no need to write C code, just a
straight-forward protocol file that you load from the startup file.
Cheers
Ben
- References:
- Question about a tutorial wiritten by Norum Silver
- Navigate by Date:
- Prev:
Re: How to be warned when a record processing is ignored because already busy (PACT=1) Ben Franksen
- Next:
Re: An error when building EPICS base R3.14.9 on Solaris 8 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Question about a tutorial wiritten by Norum Eric Norum
- Next:
Re: vxWorks 6.6 compile problem for EPICS R3.14.10-RC1 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024